Degreaser – Heavy-Duty Alkaline Kitchen Cleaner 500 ml

Yes. DEGREASER can be used for normal household cleaning when used according to the instructions. After cleaning, rinse the surface thoroughly with water. Do not pour the undiluted product or any remaining product directly into the drain. Follow the recommendations of your wastewater treatment system manufacturer.

Yes. DEGREASER is suitable for removing baked-on grease, burnt-on dirt and food residues from ovens. The oven can be briefly warmed to a maximum of 50 °C and then switched off. Do not use the product on a hot surface. Do not spray onto heating elements, the fan or electrical components. After cleaning, rinse the surface thoroughly with water.

Yes. DEGREASER can be used to remove baked-on grease and burnt-on dirt from baking trays, oven racks, the outer bottoms of pots and pans, and other resistant surfaces.

Yes. DEGREASER can be used to clean greasy cooker hood filters and grilles. Spray the product on, allow it to work, scrub if necessary, do not allow it to dry, and rinse thoroughly with water. On older filters or filters that have not been cleaned for a long time, removing accumulated grease may reveal previously formed dull areas, oxidation or heat-affected marks.

Yes. DEGREASER is suitable for removing grease, burnt-on dirt, soot and smoke deposits from grills, BBQ grates, cooking grates and smoking chambers. Clean only a cooled or warm surface, do not allow the product to dry, and rinse thoroughly with water after cleaning, especially if the surface may come into contact with food.

You can clean greasy, removable and washable parts that are resistant to the cleaner. Avoid electrical components, heating elements, control panels, ventilation openings and electronics. Rinse removable washable parts thoroughly with water after cleaning. Parts that cannot be rinsed should be wiped several times with a clean, damp cloth.

Yes. DEGREASER is suitable for cleaning cooled, soot-stained fireplace glass and soot deposits. After cleaning, rinse or wipe the glass thoroughly with water. Crystal Glass Shine can be used afterwards for a final shine.

Yes. DEGREASER is suitable for glazed tiles and other tiles that are resistant to stronger grease cleaners.

It can be used carefully and only on internal surfaces suitable for cleaning. Avoid ventilation openings, electronics, door seals and the control panel. After cleaning, wipe the surfaces thoroughly with water. For everyday microwave cleaning, the Kitchen Surface Cleaner is a better choice.

DEGREASER is a powerful alkaline cleaner, so the resistance of the surface should be considered before use. On bare, unprotected aluminium, copper, brass or zinc, the surface may darken, become matt or otherwise be affected. Take extra care with painted, lacquered, anodised, non-stick, decorative or other specially coated surfaces. If you are unsure about the surface, test the product first on a small, inconspicuous area.

Yes. It can be used on resistant floor areas contaminated with grease, for example near a grill, smoking chamber or in heavily used kitchen areas. For sensitive flooring, follow the care recommendations provided by the flooring manufacturer.

DEGREASER is designed for heavier grease, burnt-on dirt and soot. For everyday kitchen surface care, the Kitchen Surface Cleaner is a better choice.

No. DEGREASER is ready to use. Spray sparingly – using more product does not necessarily improve the result. It is more important to allow the product enough time to work, prevent it from drying on the surface, and rinse thoroughly with water after cleaning.

A few minutes are usually enough for lighter grease. Stubborn burnt-on dirt or soot may require a longer contact time, but do not allow the product to dry. If necessary, it is better to repeat the cleaning process than to leave the product on the surface for a very long time in a single application.

On surfaces that have not been cleaned for a long time, grease, soot and heat may already have affected the surface finish. Once a thick layer of old dirt has been removed, previously formed marks, oxidation, dull areas or heat-affected spots may become visible.

Detailed composition, technical and safety information is available in the digital product passport.